|
|
| |
|
| |
This
electrode type was especially developed for Japanese EDM
machines. The series includes five different types:
MEGACUT® TYP A [PDF
technical data sheet]
This zinc-coated precision wire is used when fine surfaces
are required. This wire is also recommended when cutting
carbides and poly-crystalline diamond.
MEGACUT® TYP T [PDF
technical data sheet]
This wire electrode is similar to MEGACUT® Type A
but has reduced hardness, making it perfectly suitable
for high tapering requirements. Because of this increased
tapering capability, this wire will have limited automatic
threading capability.
MEGACUT® TYP D [PDF
technical data sheet]
Due to its special coating, this electrode is ideal for
speed cutting, providing the highest performance. This
wire is also recommended for tall workpieces, interrupted
cuts and poor flushing conditions.
MEGACUT® TYP HS [PDF
technical data sheet]
This electrode is suited for the high-power generators
of the latest machines and offers maximum cutting rates,
making it ideal for high-speed production.
Type HS has a thicker coating than Type D in order to
compensate for the increased consumption of the electrode
during high speed cutting.
MEGACUT® TYP W [PDF
technical data sheet]
This type has the highest elongation of the MEGACUT®-series.
The "soft" electrode allows steep tapering.
The special coating can resist thermal loads arising from
poor flushing conditions.
|
|
|
|
|
|
